Boatsmith's Tiki 30 Abaco is on the Cover of Cruising World

I should have posted this earlier in January, but it slipped by.  If you subscribe you may have seen this cover image on the February issue of Cruising World.  That's David Halladay's Tiki 30 Abaco, the Boatsmith demo boat I was involved with building and blogging about on Pro-Built Tiki 30. 

This shot was taken in the Exumas by yacht photographer, Onne van der Wahl, after David Crawford and I sailed it over to Nassau back in June to deliver it to him for that purpose.  Unfortunately, Abaco is almost lost in this sweeping wide angle of sand, sea and sky, but hey, regardless of that, she's a cover girl now, and Cruising World is nothing to sneeze at.

Building a Boat

Stole this from Boat Bits. This is just too cool to pass up: Matt Mays from Terminal Romance. Check it out and then get out to the shop.

Reuel Parker's Ibis Sharpie Nearing Launch

Reuel Parker is in the final stages of his 45-foot sharpie schooner project, Ibis.  Here are some photos taken by David Halladay during a recent visit to the build site in Ft. Myers.  It's not everyday that you see a flat-bottomed, shallow-draft vessel of this length.

This is Parker's concept of a "maxi-trailerable" sailing vessel.  While Ibis is not something that you would trailer down to the lake for a daysail, she is a vessel that could be trailered if necessary, for off-season storage or maintenance at home, or for reaching distance cruising grounds in a hurry.  To trailer this much boat, you will need a substantial truck, like one of David's work trucks parked alongside in the photo below.

Here's a close-up shot of the stern, showing the balanced rudder and how it is hung on the narrow stern.

The mast is mounted in a substantial tabernacle.  Reuel Parker describes the advantages and the design of these in his book:  The New Cold-Molded Boatbuilding: From Lofting to Launching.
.

This view of the bow shows the bowsprit and samson post, as well as a custom A-frame that is used to assist in raising and lowering the mast.  When not in use for this purpose, it will be fixed in position at the correct height to form a bow pulpit rail.  This is a brilliant example of multi-functional equipment incorporated in this simple vessel. 

Designed for cruising the in the tropics, Ibis is equipped with plenty of opening deck hatches and opening portlights.  The cockpit is also shaded by a bimini.

Down below, the interior has a spacious feel with white paint and light-colored wood trim.  This vessel is designed for a simple style of cruising and living aboard in out-of-the-way places like the Out Islands of the Bahamas.

Ibis is based on the smaller 36-foot San Juan Island Double-ended Sharpie, described in detail beginning on page 141 of his definative work on the type:  The Sharpie Book